Author: Li Li
2025
2022
2021
Stability evaluation of side-exposed backfill considering adjacent extraction at different mine depths
Ruofan Wang, Feitao Zeng, Li Li
IS IT EFFICIENT TO REDUCE SIDEWALL FRICTION BY USING LUBRICANT MATERIALS IN LABORATORY TESTS?
Jian Zheng, Li Li
How to obtain reliable shear strength by direct shear tests: A revision to the minimum required specimen size to dmax ratio of ASTM D3080/D3080M-11
Akram Deiminiat, Li Li, Feitao Zeng
Ruofan Wang, Feitao Zeng, Li Li
IS IT EFFICIENT TO REDUCE SIDEWALL FRICTION BY USING LUBRICANT MATERIALS IN LABORATORY TESTS?
Jian Zheng, Li Li
How to obtain reliable shear strength by direct shear tests: A revision to the minimum required specimen size to dmax ratio of ASTM D3080/D3080M-11
Akram Deiminiat, Li Li, Feitao Zeng
2020
2018
Analytical and experimental studies of the evolution of the excess pore water pressure during the deposition of a slurried material
Jian Zheng, Li Li
Burgers creep model used for describing and predicting the creep behaviour of a rock under uniaxial and triaxial compression test conditions
Ruofan Wang, Li Li
Jian Zheng, Li Li
Burgers creep model used for describing and predicting the creep behaviour of a rock under uniaxial and triaxial compression test conditions
Ruofan Wang, Li Li
2017
A conceptual analytical solution for estimating the short-term pressure of paste fill varying from viscous to liquid state, placed in mine stopes
Li Li, Jian Zheng
An empirical analytical solution for estimating the elastic stresses around typical mine stopes for the Mathews-Potvin stability analyses
Philippe Pagé, Li Li, Richard Simon
Analytical solutions of Gibson’s model for estimating the pore water pressures in accreting deposition of slurried material under one-dimensional self-weight consolidation
Jian Zheng, Li Li, Mamert Mbonimpa, Thomas Pabst
Analytical solutions to evaluate the evolution of the water table and pore water pressure in stopes with hydraulic fill
Pengyu Yang, Li Li
Li Li, Jian Zheng
An empirical analytical solution for estimating the elastic stresses around typical mine stopes for the Mathews-Potvin stability analyses
Philippe Pagé, Li Li, Richard Simon
Analytical solutions of Gibson’s model for estimating the pore water pressures in accreting deposition of slurried material under one-dimensional self-weight consolidation
Jian Zheng, Li Li, Mamert Mbonimpa, Thomas Pabst
Analytical solutions to evaluate the evolution of the water table and pore water pressure in stopes with hydraulic fill
Pengyu Yang, Li Li
2016
2014
Numerical investigation of the lateral earth pressure coefficient along the VCL of vertical backfilled stopes
Mohamed Amine Sobhi, Li Li, Michel Aubertin
A 3D analytical solution for the short-term stress distribution in backfilled stopes and on barricades
Pengyu Yang, Li Li
An improved solution for sizing barricades made of waste rock to retain cemented paste backfill
Pengyu Yang, Marin Brochu-Baekelmans, Li Li, Michel Aubertin
Mohamed Amine Sobhi, Li Li, Michel Aubertin
A 3D analytical solution for the short-term stress distribution in backfilled stopes and on barricades
Pengyu Yang, Li Li
An improved solution for sizing barricades made of waste rock to retain cemented paste backfill
Pengyu Yang, Marin Brochu-Baekelmans, Li Li, Michel Aubertin
2013
2011
2009
2007
2006